Fm Radio Mode / Aux In Mode - Revo Supersignal Owner's Manual

FM RADIO MODE
FM OPERATION
Please ensure that the radio's antenna is extended before operation
in FM MODE.
To enter FM MODE, press the
screen is displayed.
If this is the fi rst time that SUPERSIGNAL has been used in FM MODE,
it will start at the beginning of the frequency range (87.50MHz),
otherwise SUPERSIGNAL will default to the station that was being
listened to last.
Pressing the SELECT button will start the radio scanning for the next
available station. SUPERSIGNAL will automatically stop scanning
when a station is found.
To fi ne tune, use UP/DOWN or LEFT/RIGHT on the joystick controller to
incrementally change the frequency.
When on an FM station that has a strong signal and is broadcasting
RDS information, SUPERSIGNAL will display the station name and other
pieces of text information on-screen.
FAVOURITE STATION PRESETS
SUPERSIGNAL allows you to store your favourite stations as presets,
either via its 5 front panel mounted 'hot-keys', or the numbered
preset buttons located on the remote control.
To store the station you are currently listening to as a preset, simply
press and hold a preset button until "Preset Stored" is display on your
radio's screen.
If you want to change a particular preset in the future, repeat
the process and the previously stored preset will be automatically
overwritten.
12
button until the FM MODE intro
14:12
FM Mode
14:12
87.50MHz
14:12
BBC R2
Other Music
14:12
Preset Stored