Prodigy Athletics CTE2000E Owner's Manual page 9

PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING
28
WASHER
NUT
26
3
7
RIGHT
Model CTE2000E Children's Circuit Training & Spinning Combo Bike
IMPORTANT
Tools needed for assembly: Hammer, Adjustable Wrench
Step 1. Attach FRONT STABILIZER (2), with CASTERS (45) and
REAR STABILIZER (3) to FRAME (1) with M8 x 73mm
CARRIAGE BOLTS (31), M8 WAVE WASHERS (37) and
M8 CAP NUTS (40).
Step 2. NOTE: One PEDAL (7) has RIGHTHAND threads and the
other has LEFTHAND threads.
Thread RIGHTHAND threads into RIGHT CRANK ARM
(8) and LEFTHAND threads into LEFT CRANK ARM (8).
Thghten securely.
Step 3. Remove NUTS and WASHERS from SADDLE (28) and
attach SADDLE to SEAT POST (4) with NUTS and WASH-
ERS.
4
Step 4. Insert SEAT POST (4) into FRAME (1), with adjustment
holes facing to the rear, and lock at desired height by
threading LOCKING LEVER HANDLE (26) into FRAME
until tight.
IMPORTANT: Make sure SEAT POST is locked before
1
40
8
RIGHT
37
FIGURE 1 - ASSEMBLY
exercising.
2
9
FIGURE 1
2
31