Prodigy Athletics CTE2000E Owner's Manual page 10

FIGURE 2 - ASSEMBLY
Step 5. Tie a piece of string onto the REED
SWITCH WIRE (49), see Detail, and in-
sert string up through the HANDLEBAR
POST (5).
Step 6.
Holding the string, slide the HANDLE-
BAR POST (5) into FRAME (1), with
adjustment holes facing front, and lock
at desired height by threading LOCK-
ING LEVER HANDLE (26) into FRAME
(1) until tight.
Step 7. Pull plug of REED SWITCH WIRE (49)
through hole at top of HANDLEBAR
POST (5).
48
49
DETAIL
Model CTE2000E Children's Circuit Training & Spinning Combo Bike
6
5
FIGURE 3
5
49
1
FIGURE 2
FIGURE 3 - ASSEMBLY
Step 8. Attach HANDLEBAR (6) to HANDLE-
BAR POST (5) with M8 x 15mm BOLTS
(33) and M8 SPRING WASHERS (39).
Step 9. Plug EXTENSION WIRE (48) into REED
SWITCH WIRE (49), see Detail.
39
10
DETAIL
26
33