How To Control The Camera - Dalstar DS-44-04M30 User's Manual And Reference

4M30 Camera User's Manual
&DPHUD 2SHUDWLRQ

3.1 How to Control the Camera

The 4M30's RS-232-compatible serial interface allows you to control its configuration and
operation, including:
•
•
•
•
•
•
Command Protocol Overview
The camera accepts 8-bit command/value pairs
via its RJ-11 serial port using RS-232 compatible
signals.
Camera commands are divided into two basic
sets:
•
•
DALSA
Triggering Mode
Frame Rate
Integration Time
Gain
Offset
Reset
"clock" commands which apply to the
electronics that drive the image sensor. These
include clock generation, frame rate,
integration time, and binning. Clock commands effect the entire camera, and are not
channel specific. A single command will impact all channels.
"ADC" commands which apply to the electronics that process and digitize the video.
These include gain and offset. ADC commands are channel specific. Four separate
commands must be issued to change all four channels.
Serial Port Configuration
Baud 9600, fixed
Start bits 1
Data bits 8
Stop bits 1
Parity None
18
3
03-32-10030-03