Teknetics Gamma Sports 6000 Owner's Manual page 5

ASSEMBLY
G
Position S-Rod upright.
1
G
Rotate the LOCKING COLLAR fully in the
2
counterclockwise direction.
G
Insert your finger inside the tube and make sure the
3
INTERNAL CAM LOCK is flush with the inside of the
tube.
S-ROD
S-ROD
G
5
G
Insert the MIDDLE STEM into the S-ROD,
4
with the SILVER BUTTON pointed upward
G
Rotate the MIDDLE STEM until the SILVER BUTTON
5
locates in the hole.
G
Twist the LOCKING COLLAR fully in the clockwise
6
direction until it locks.
G
Repeat this process on the LOWER STEM.
7
G
Using the BOLT and KNURLED KNOB, attach the
8
SEARCHCOIL to the LOWER STEM.
G
Adjust the LOWER STEM to a length that lets you
9
maintain a comfortable upright posture, with your arm
relaxed at your side, and the SEARCHCOIL parallel to the
ground in front of you.
G
Wind the CABLE securely around the STEMS.
1 0
G
Connect CABLE PLUG to housing.
11
Do not twist the Cable or Plug. Turn Locking Ring only.
Use minimal finger pressure to start the threads. Do not
cross-thread. When the Locking Ring is fully engaged over
the threaded connector, give it a firm turn to make sure that it
is very tight. When the Locking Ring is fully engaged over the
threaded connector, it may not cover all of the threads.
G
Tighten both LOCKING COLLARS.
1 2
*
Note: Very tall users can purchase the optional Extended Lower Stem (TUBE5X), for extended reach.
Caution:
Forcing in MIDDLE STEM with CAM LOCK raised may form a burr on
camlock. If this happens, remove burr with knife to allow insertion.
LOCKING
G
2
COLLAR
INTERNAL
G
3
CAM LOCK
SILVER BUTTON
MIDDLE G
4
STEM
MIDDLE STEM
G
4
5