Samsung SNP-3370 User Manual page 62

Chapter 4. Using Web Viewer
Preset Setup
To save a desired location for the Pan/Tilt or Zoom/Focus operation along with detailed
camera settings for the location, configure the following options.
Category
Number Select a number to identify a preset. (Preset numbers 1 to 255 are available.)
Name Name a preset.
Move Moves to a selected preset when its number is selected.
Edit Enables detailed camera settings to be configured for a preset.
Saves a preset; move to a desired location for the Pan/Tilt or Zoom/Focus operation, enter
Add a preset number and name, and then press the Add button to save the location as a
preset.
Delete Deletes an existing preset; select a preset number, and then press the Delete button.
Caution
To configure detailed camera settings for a preset, select a preset number, and then move the
camera to the preset before pressing the
Sequence Setup
You can configure detailed sequence settings for each camera mode. Available camera
modes are Swing, Group, Tour, Trace, and Auto Run, and they are described in the chart
below.
Category
Swing Commands the camera to move between 2 selected presets, monitoring the route.
Recalls groups of multiple preset locations consecutively. A group can contain up to
Group
255 presets.
Recalls groups of presets consecutively in an orderly manner. Up to 6 groups can be
Tour
listed for this function.
Trace saves and reactivates patterns of custom camera movements. Up to 4
movement patterns can be memorized.
Trace & Auto Run
Auto Run commands the camera to automatically perform a preset sequence action if
no command has been entered via the controller for a while.
NETWORK PTZ CAMERA
Description
button on the right of the screen.
button.
Description
62
User Guide