Casio PX-5S Manual page 18

Parameter MSB
DSP Parameter[1] 23H
DSP Parameter[2] 23H
: :
DSP Parameter[16] 23H
For details about each DSP parameter, see "VII DSP Parameter List".
7.25.5 Tone
Tone parameters can be changed by NRPN. The relationship between each parameter and NRPN num-
bers is shown below.
Tone Common Edit
Parameter MSB
Volume 3FH
Reverb Send 3FH
Chorus Send 3FH
Delay Send 3FH
Dynamic Panning 3FH
Note1: For information about the relationship between setting values and send/receive values, see "33.1 Off/On Setting Value
Table" in "VIII Setting Values and Send/Receive Values" of this document.
Non-drum Tome Edit In the case of non-hex layer tones, setting values are applied in relation to
reference values possessed by tones. In the case of hex layer tones, setting values are basically applied
as absolute values. However, drum tones are not applied when they are received.
Parameter
LFO Pitch Rate
LFO Pitch Depth
LFO Pitch Delay
Filter Cutoff
Filter Resonance
Amp&Filter Attack Time
Amp&Filter Decay Time
Amp&Filter Release Time
Note1: For a hex layer tone, for information about the relationship between setting values and send/receive values, see "33.25
–128 - 0 - +127 Setting Value Table" in "VIII Setting Values and Send/Receive Values" of this document.
Note2: For a hex layer tone, the values of all layers are changed.
Note3: For a hex layer tone, the values of Decay 1, 2, and 3 Time are changed.
Note4: For a hex layer tone, the values of Release 1 and 2 Time are changed.
Hex Layer Edit
Parameter MSB
Layer On/Off 5XH
Octave Shift 5XH
Pitch LFO Depth 5XH
Filter LFO Depth 5XH
Amp Volume 5XH
Amp Pan 5XH
Amp LFO Depth 5XH
DSP On/Off 5XH
LSB Notes
00H
01H
:
0FH
LSB Notes
00H
01H
02H
03H
10H Note1
MSB LSB Notes
01H 08H
01H 09H Note1
01H 0AH
01H 20H Note2
01H 21H Note2
01H 63H Note2
01H 64H Note2,Note3
01H 66H Note2,Note4
LSB Notes
00H Note1
01H Note2
02H
03H
04H
05H Note3
06H
07H Note1
18