Vibrato Depth (4Dh); Vibrato Delay (4Eh); Portamento Control(54H); High Resolution Velocity Prefix (58H) - Casio PX-5S Manual

7.18

Vibrato Depth (4DH)

Message Format:
n:
vv:
Note1: For information about the relationship between setting values and send/receive values, see the "33.4 –64 - 0 - +63
Setting Value Table" in "VIII Setting Values and Send/Receive Values" of this document.
Receive Receipt changes the degree of pitch modulation.
7.19

Vibrato Delay (4EH)

Message Format:
n:
vv:
Note1: For information about the relationship between setting values and send/receive values, see the "33.4 –64 - 0 - +63
Setting Value Table" in "VIII Setting Values and Send/Receive Values" of this document.
Receive Receipt changes the time it takes until note vibrato starts.
7.20

Portamento Control(54H)

Message Format:
n:
vv:
Receive Receipt of this message first stores the Source Note Number for the next note. When the next
Note On is received, the portamento effect is applied to the note using this Source Note Number as the
pitch start point and the Note On event key number as the end point. If there already is a note being
sounded by Source Note Number at this time, the new note on is not performed and the portamento
effect is applied to the pitch of the note being sounded. That is to say that legato play is performed.
7.21 High Resolution Velocity Prefix (58H)
Message Format:
n:
vv:
Transmit Sends the lower seven bits of 14-bit Velocity when a key is pressed or released.
Receive Receipt is handled, in combination with the following Note On/Off message, as the lower
seven bits of 14-bit Velocity. (Note1)
For information about the relationship between the Note On/Off message and High Resolution Ve-
locity Prefix message, see "Instrument Velocity Resolution" at the beginning of part II.
BnH 4DH vvH
MIDI Channel Number
Value (Note1)
BnH 4EH vvH
MIDI Channel Number
Value (Note1)
BnH 54H vvH
MIDI Channel Number
Source Key Number
BnH 58H vvH
MIDI Channel Number
Value
15