Using Only The Front Speakers And Subwoofer (2Ch Stereo); Resetting Sound Fields To The Initial Settings - Sony HT-SF2300 Operating Instructions Manual

Be sure to use the buttons on the receiver for
this operation.
Resetting sound fields to
the initial settings
2
1,2
1
Press
1/6
to turn off the
receiver.
2
While holding down SOUND
FIELD +, press
1/6.
"S.F. CLR." appears on the display and
all sound fields are reset to their initial
setting.
Using only the front
speakers and subwoofer
(2CH STEREO)
2CH
In this mode, the receiver outputs the sound
from the front left/right speakers and
subwoofer only.
When multi channel surround formats are
input, the signals are downmixed to 2 channel
with bass frequencies being output from the
subwoofer.
When standard 2 channel stereo sources are
input, the receiver' s bass redirection circuitry
will be activated. The front channel bass
frequencies will be output from the subwoofer.
Press 2CH.
You can also use SOUND FIELD
+
or
SOUND FIELD - on the receiver.
48
GB