Configure Wpa-Enterprise (Radius) - D-Link DIR-655 User Manual

Section 4 - Security

Configure WPA-Enterprise (RADIUS)

It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish wireless connectivity before
enabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead.
1.. Log into the web-based configuration by opening a web browser and
entering the IP address of the router (192.168.0.1). Click on.Setup.
and then click.Wireless.Settings on the left side.
Next to Security Mode, select WPA-Enterprise.
2.
Next to WPA Mode, select Auto, WPA2.Only, or.WPA.Only. Use Auto
3.
if you have wireless clients using both WPA and WPA2.
4. Next to Group Key Update Interval, enter the amount of time before
the group key used for broadcast and multicast data is changed (3600
is default).
5. Next to Authentication Timeout, enter the amount of time before a
client is required to re-authenticate (60 minutes is default).
6. Next to RADIUS Server IP Address enter the IP Address of your RADIUS
server.
7. Next to RADIUS Server Port, enter the port you are using with your
RADIUS server. 1812 is the default port.
8. Next to RADIUS Server Shared Secret, enter the security key.
D-Link DIR-655 User Manual 85