Aggressive Lpm Support - DFI-ITOX SB331-IPM User Manual

3
BIOS Setup
If AHCI or RAID is selected in the SATA Mode fi eld, it will display the following If AHCI or RAID is selected in the SATA Mode fi eld, it will display the following
information: information:
SATA Controller(s)
SATA Mode Selection

Aggressive LPM Support

SATA Controller Speed
Serial ATA Port 0
Software preserve
Port 0
Hot Plug
External SATA
SATA device type
Spin up device
Serial ATA Port 1
Software preserve
Port 1
Hot Plug
External SATA
SATA device type
Spin up device
Serial ATA Port 2
Software preserve
Port 2
Hot Plug
External SATA
Spin up device
Serial ATA Port 3
Software preserve
Port 3
Hot Plug
External SATA
Spin up device
Serial ATA Port 4
Software preserve
Port 4
Hot Plug
External SATA
Spin up device
Serial ATA Port 5
Software preserve
Port 5
Hot Plug
External SATA
Spin up device
Aggressive LPM Support
Enable PCH to aggressively enter link power state.
SATA Controller Speed
Indicates the maximum speed the SATA controller can support.
Serial ATA Port 0 to Serial ATA Port 5
These fi elds are used to confi gure the connected SATA devices.
60
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Advanced
[Enabled]
[AHCI]
[Enabled]
[Gen3]
Empty
Unknown
[Enabled]
[Disabled]
[Disabled]
[Hard Disk Driver]
[Disabled]
Empty
Unknown
[Enabled]
[Disabled]
[Disabled]
[Hard Disk Driver]
[Disabled]
Empty
Unknown
[Enabled]
[Disabled]
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
[Disabled]
[Disabled]
Empty
Unknown
[Enabled]
[Disabled]
[Disabled]
[Disabled]
Empty
Unknown
[Enabled]
[Disabled]
[Disabled]
[Disabled]
Empty
Unknown
[Enabled]
[Disabled]
[Disabled]
[Disabled]
Determines how SATA
controller(s) operate.

Select Screen

Select Item
Enter: Select
+/ -:
Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit