Power/Rem/Led Side - Rockford Fosgate Punch Owner's Manual

4-channel amplifier
Table of Contents

Advertisement

Four (4) custom, round, hex screws included in the acces-
Mounting
Screws
sory pack hold the unit in place. These screws are covered
when the end caps are installed.
Rear Speaker
Output Terminals
The Punch 4-Channel is turned on by connecting the blue
REM
Connector
remote turn-on wire to the source unit's "Accessory" or
"Auto Antenna" lead, either of which will go to +12 volts
when the source unit is turned on.
LED Power
The LED illuminates when the unit is activated.
Indicator
B+/GND
These connectors are used to supply power and ground
Power
to the amplifier and accept 12 gauge - 8 gauge wire.*
Connector
These gold-plated terminal blocks connect the Right/Left
Speaker
Ouptut
Front and Right/Left Rear channel outputs to the speak-
Terminals
ers and accept wire sizes from 8 gauge through 18 gauge.
Gold-plated connectors are immune to corrosion that can
cause
*Rockford Fosgate's Perfect Interface line of accessories in-
cludes high quality power
interconnecting cable and other products to complete your
installation. Ask your Authorized Rockford
Perfect

Power/REM/LED Side

L E D
Indicator
Front Speaker
Output Terminals
signal
deterioration.
and speaker wire, gold plated RCA
Interface.
6
B+/GND
Power Connectors
REM
Connector
Fosgate Dealerabout

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Punch 4040dsmPunch 4080dsm

Table of Contents