Chapter 6. Installing The Novell Netware Device Driver; Netware Device Driver Files And Parameters; Installing The Netware 5.1 Device Driver - IBM 59P5712 Installation And User Manual

Ibm fastt host adapter installation and user's guide
Table of Contents

Advertisement

Chapter 6. Installing the Novell NetWare device driver

This section provides instructions for installing the NetWare device driver in an
installed Novell NetWare system.

NetWare device driver files and parameters

The following files are provided on the IBM FAStT Host Adapter device drivers
diskette that you created in Chapter 4 for the NetWare 5.1 device driver installation:
Be sure to review the README.TXT file for both new and changed information.
To customize the interface between the device driver and Novell NetWare, load the
QL2200.HAM device driver with the following parameters.

Installing the NetWare 5.1 device driver

The QL2200.HAM device driver might not be compatible with NetWare versions
earlier than 5.1.
Note: You can enter the LOAD command lines in your NetWare STARTUP.NCF
Perform the following steps to install the NetWare 5.1 device driver in a previously
installed NetWare system.
 Copyright IBM Corp. 1998, 2002
NETWARE\QL2200.HAM: Driver for NetWare 5.1
NETWARE\QL2200.DDI: Installation information file for QL2200.HAM driver
README.TXT: Helpful hints about the device driver and setting options for
NetWare 5.1
RELEASE.TXT: History of release fixes
Parameter
SLOT
/LUN
file to install the driver automatically when your system starts.
1. Insert the IBM FAStT Host Adapter device drivers for NetWare diskette that you
created in Chapter 4 in the diskette drive.
2. Copy the QL2200.HAM device driver file from the diskette to the server root
directory. For example, type:
copy a:\NETWARE\QL22 .HAM c:\NWSERVER\
Where a is the diskette drive letter and c is the root directory.
3. If you are installing the driver from a CD-ROM, type:
copy z:\NW51\22 \NETWARE\QL22 .HAM c:\NWSERVER\
Where z is the CD-ROM drive letter and c is the root directory.
Description
Provides support for multiple IBM FAStT Host Adapters and installs
the device driver for each adapter individually. This parameter is
mandatory if you have more than one adapter.
Enables support for multiple LUN (logical unit number) devices.
This parameter is optional.
19

Advertisement

Table of Contents
loading

Table of Contents