Connected Device - Samsung BD-H8500 User Manual

Connected Device

Choose an equipment that you have connected to this product to hear the sound
in addition to your TV. Loudness of DTV Programme will be adjusted according to
your equipment.
●
AV Receiver : Select this If you use a general AV Receiver / Home Theatre
Equipment or a Television to hear sound.
●
AV Receiver (Offset Mode)
–
If you use THX Certified AV Receiver / Home Theatre Equipment.
–
In case Digital Output
much louder than MPEG1 Layer2 Audio while watching DTV Programme,
select this even if your AV Receiver is not THX Certified one.
●
Stereo Device
that support Optical Digital Audio Input as PCM format.
"
For users whose TV is the only sound-producing device: 1) If the TV does not support
Dolby Digital bitstream input via HDMI, no specific setting is required. 2) If the TV
supports Dolby Digital bitstream input via HDMI, set Connected Device to Stereo.
"
If the DTV Programme you are watching is produced according to EBU R128, The
Average Loudness between MPEG1 Layer2 Audio, Dolby Digital Audio, Dolby Digital
Plus Audio, HE-AAC Audio can be reduced. If the DTV Programme do not meet the
EBU R128, there may be still some amount of difference of average Loudness between
a TV Programmes.
"
Substantial number of AV Receiver / Home Theatre Device decode Dolby Digital /
Dolby Digital Plus with +4dB OFFSET when compared to same encoding level of PCM
input. This kind of product include both THX Certified one and also none THX Certified
one. If user select
Digtial / Dolby Digital Plus audio decoded by such a product and MPEG1 Layer2 Audio
decoded by this product will be similar.
: Select this if your case is one of two shown below.
is set to Bitstream, and If you feel the Dolby Audio
: Select this if you use a Stereo Amplifier or Recording Device
"AV Receiver (Offset
Try Now
Mode)", the average loudness between Dolby