Table of Contents
Advertisement
HDMI Audio (Default: ON)
Your setting will be activated.
o
-'
1"1
C
;:)
-£
~$I_~ ~~m!HFHHJHnHU
!~
.
1'"..
1~.::~~·HH··1
....
..".- :::
,
,ON
:
;~tl;~!n~iHfif:in~~~t!;f~~.HfI
RGB Range (Default: Normal)
~tW1flnrrrm5t?-Trrt
$'
'rn,mtrutt-:Y"rFW
i i
':,crnrtuil:trlPWUXm;tUOnUF",.,nmutr
Functions available for the HDMI-CEC
• One touch play
When the operations with following buttons of this
unit's remote control are performed, the TV will
automatically turned on and switch to appropriate input
channel.
Buttons for one touch play:
[TIMER PROG.], [SETUP], [INPUT SELECT
~],
[PLAY .. ], [TOP MENU], [MENU/LIST]
• System information
Get & Set Menu Language: This unit recognizes the
050 language set for the TV and automatically set the
same language as the player menu language (050
menu language) for this unit.
Power off: When you turn the TV off, this unit and all
equipment connected via HOMI will automatically turns
off except during recording on the unit.
Receiving operational signal from TV's remote
control: You can operate this unit with TV's remote
control. Check your TV owner's manual for details.
GENERAL SETTING
- - - - - - - - - - - - - - - - - - -
[iJ
If you do not want to output the audio through HOMI
(when you digitally output the audio through the
COAXIAL DIGITAL AUDIO OUT jack to your audio system,
etc.), you can set the HOMI audio output off.
Use [. /
T]
to select a setting, then press [ENTER].
• Set to "OFF" when the HOMI sound is not output.
[II
You can adjust the RGB range to make the dark areas of
the HOMI images brighter.
Use [. /
Tl
to select a setting, then press [ENTER].
• Select "Enhanced" if the black-white contrast is not clear.
• This setting is effective only for HOMI RGB output.
,;
.".";'-
.
Your setting will be activated.
HDMI CEC (Default: OFF)
You can control all HOMI-CEC compatible components
connected via HOMI cable by simple button operations of
remote control of this unit.
In order to enable the function you need to set "HOMI
CEC" to "ON".
Use [. /
T]
to select a setting, then press [ENTER].
m
a.
Your setting will be activated.
'0
...
::r
(!)
...
'II
EN
91
Hide quick links:
Advertisement
Table of Contents
