Audio Out; Dynamic Range Control; Settings For Pcm; Setting For Dolby Digital - Toshiba DR430KU Owner's Manual

GENERAL SETTING
'"
"
Your setting will be activated.
PCM : Converts the Dolby Digital into PCM (2 channel).
When your amplifier/decoder is NOT
compatible with Dolby Digital. set to "PCM".
Stream : Outputs Dolby Digital signals,
When your amplifier/decoder is compatible
with Dolby Digital, set to "Stream".
Your setting is activated.
ON : Outputs DTS signals.
If your amplifier / decoder is compatible with
DTS", set to "ON".
OFF : No DTS signal is output.
If your amplifier / decoder is NOT compatible
with DTS", set to "OFF".
[Q]I
Settings for DTS (Default: ON)
Select a setting using [. /
.,.1,
then press [ENTER].
Choose the appropriate audio setting for your external device,
It will only affect a disc playback.
Use [.
/.,.1
to select a desired item, then press [ENTER].
~k
.' ....•. . . .
,,.ette. . . . .
'~,;pyl\~mjcrang~
control
function is available Qnly
on
~~:~~piscswhichare
recorded inthe
Dolby Digital
"g:format.'· . ..... .
~:':~: ;..
.
Your setting will be activated,
~ t
r:'
m
Wi trl' .'
"rw;;;;t
WHt "Hm'"
lItt"uvrrnE
1)
rh
H--'T'" 'W"';;;"TPl
II)
[II
Settings for Dolby Digital (Default: Stream)
Use [. / .,.] to select a setting, then press [ENTER].
!Kli
Dynamic Range Control (Default: ON)
Set to
"ON"
to compress the range between soft and loud sounds,
Use [. /
.,.1
to select a setting, then press [ENTER].
lIDl
Settings for PCM (Default: 48kHz)
Use [. / .,.1 to select a setting, then press [ENTER].
Your setting will be activated,
48kHz : If your amplifier/decoder is NOT compatible
with 96kHz PCM, select "48kHz", 96kHz sound
will be output in 48kHz.
96kHz : If your amplifier/decoder is compatible with
96kHz PCM, select "96kHz". 96kHz sound will
be output.
',Ofe'
':::'.·pfaYI~g~kdisc
withcopyr:ight
Protedion,
;;~Venify6u:se[ectR96kH:ZR;thesound
w rtl bed9wn'
·~~~ted~~kH.z
.•' , ' . , ' . ' . , : :
EN 85