Table of Contents
Advertisement
Channel Information:
5.
Pairing
1. Make sure the camera is turned on, the power LED of the camera will
Blink if it is power
on.
2. Click
for match setting, select a camera which you want to match, then
press and hold the pairing button on the side of the camera for about 6
seconds. If the pairing is successful, you can find "Match complete a
camera had been connected." on the screen as shown below.
3
Press
for full view on the screen as shown below
Displays the current channel's information
4. According to the previous method, to set cameras on other channels.
The monitor will display quad-view window as shown below.
8
Advertisement
Table of Contents
