Motion Detect - IAT Mini Portable Wireless NVR System User Manual

Motion Detect

This section will be available if the recording is set to "Triggered", this particular
area allows users to customize sections of detection and the sensitivity.
Display Screen: Hit the "Refresh View" button to refresh the image
Detection Settings: Allows custom areas to detect on the displayed screen
a. Full-area detection: Detects all areas on the screen
b. Custom detection: Detects user created detection blocks
Add new area: Select the icon "Add new Area" to add new area
to detect, do this by holding down the right mouse button over the
displayed screen area to create a new block.
Delete Area: Select a block on the displayed screen and hit this
button to delete it
Delete All Areas: Deletes all blocks on the displayed screen
Test Detection: Test the detection by moving an object in front of
the camera, the blocks should change color when it detect motion
c. Sensitivity: Adjust the sensitivity of the detection
Copy Right
www.iat101.com
Webpage :
© IA Technologies 02/23/2011
www.ia-tecs.com
;
14