3- Operation; Viewing Page - IAT Mini Portable Wireless NVR System User Manual

3-- Operation

Viewing Page

Insert the USB Receiver to one USB port of PC and double-click
on the desktop, the viewer screen will display as shown below
Main Screen
then turn on the camera.
Monitoring Screen:
1.
Depending on the configuration, you can have different type of viewing
methods on this screen.
Channel Status:
2.
camera.
This will display the camera's view.
This will display the status of each individual
:
This icon indicates that the camera is monitoring
:
This icon indicates that the camera is in standby
:
This icon indicates that the camera is recording
:
This icon indicates that the camera's audio is enabled
Option Menu:
3. This area allows you to do the following:
Snapshot: Built-in snapshot function allows user to capture
images they would like
Detect: Controls the view to go into detection mode or standby
mode
Web Server: Enables web server mode for remote viewer
Setup: This system built-in web interface offers more advanced
settings. On the viewing page, click the SETUP icon to enter
server settings page. It is a toggle button to switch between config
and view pages.
Playback: Enters the playback mode to view recorded videos
Camera/Screen Control:
4.
:
Displays the signal strength of wireless cameras
:
Cruise camera to let it automatically move on its own
:
Opens the snapshot folders to view captured pictures
:
Adjusts the screen size on the monitoring screen
:
Displays one channel on the monitoring screen
:
Displays multiple channels on the monitoring screen
:
Cycles the camera to see all area
Copy Right © IA Technologies 02/23/2011
www.iat101.com
Webpage :
mode
This area controls the following:
www.ia-tecs.com
;
7