Sony NEX-F3 Instruction Manual page 16

4
Close the cover.
5
Connect the camera to the AC Adaptor (supplied), using
the micro USB cable (supplied). Connect the AC Adaptor
to the wall outlet (wall socket).
The charge lamp lights orange, and
charging starts.
• Set the power switch to OFF while
charging the battery. If it is set to ON,
the camera cannot charge the battery.
• When the charge lamp flashes,
remove and re-insert the battery
pack.
Notes
• If the charge lamp on the camera flashes when the AC Adaptor is connected to the
wall outlet (wall socket), this indicates that charging is temporarily stopped
because the temperature is outside the recommended range. When the temperature
gets back within the appropriate range, the charging resumes. We recommend
GB
16
Power cord
(Mains lead)
Charge lamp
Lit: Charging
Off: Charging finished
Flashing: Charging error or
charging temporarily stopped
because the temperature is
outside the recommended
range