Adjusting The Brightness Of Still Images (Exposure Compensation); Using The Self-Timer - Sony NEX-F3 Instruction Manual

Adjusting the brightness of still images
(Exposure compensation)
You can adjust the exposure in 1/3 EV steps in a range of –3.0 EV to +3.0 EV.
1
Press
on the control wheel.
2
Turn the control wheel to select the desired value, and
press the center.
When the image is too bright, set [Exposure Comp.] toward –.
When the image is too dark, set [Exposure Comp.] toward +.

Using the self-timer

1
Press
the control wheel.
2
Turn the control wheel to select
3
Press Option, then turn the control wheel to select the
desired mode and press the center.
(Self-timer: 10 Sec): Sets the 10-second delay self-timer. Use this
when you want to include yourself in the picture.
When you press the shutter button, the self-timer lamp flashes and beeps
until the shutter operates.
(Self-timer: 2 Sec): Sets the 2-second delay self-timer. You can
prevent blur caused by camera shake that occurs when the shutter button
is pressed.
• To cancel the timer, press
GB
36
(Exposure Comp.)
(Drive Mode) on
(Self-timer).
(Drive Mode) again.