Keypad Tones - Vision -64 User Manual

Icon Status
The area is turned off.
On
The area is turned All On or Part On
Off
The area is turned All On
On
The area is turned Off
Off
You have mail waiting to be read
On
Off No Mail
Area is ready to turn on (All On / Part
On
On)
Not ready, Zone Open
Off
All On
On
Red
LED
Alarm
Flashing
Area is off.
On
Green
LED
Flashing Area not ready to turn on
Red &
Green
Flashing Installer programming mode is active.
LED
Table 3: Status ICONs, LED Indicator's and Their Meanings

KEYPAD TONES

Your keypad emits several distinct tones and displays text to
alert you to system events. Additional bells or sirens may also be
connected to your system. Bells or sirens mounted on the exterior
of your premises alert neighbours to emergencies and provide an
audible guide for police and fire fighters.
Type
Fire
When a fire zone sounds an alarm, the keypad will
Alarm
sound 3 seconds on and 2 seconds off (repeat).
Tone
When a burglary zone activates while your system
Burglary
is turned on, your keypad emits a continuous
Alarm
siren tone. It sounds for the time set by your
Tone
security company.
When a system component is not functioning
Trouble
properly, your keypad sounds 4 fast short beeps
Tone
followed by a 5 second pause (repeat).
Key
Pressing any key on the keypad sounds one short
Press
beep, indicating that the key press is accepted.
Tone
When you enter the premises through a zone
programmed for entry delay, the keypad sound a
Entry
Hi/Low tone to remind you to turn off the area.
Delay
If the area is not turned off before the entry delay
Tone
expires, an alarm condition will sound and a
report may be sent to your alarm company.
Issue 1.03
Meaning
Meaning
After you turn an area All On, the keypad will
sound 1 short beep every second. During the last
Exit
Delay 10 seconds fast short beeps will be heard. If you
Tone
don't exit before the delay time expires and an
exit delay door is faulted, an alarm occurs.
If you press an incorrect key, your keypad will
Error
Tone
sound a 2 second tone.
The keypad will sound a Hi / Lo tone to indicate
Menu
you have entered MENU Mode and a Lo/Hi tone
Mode
to indicate you have exited MENU mode.
The keypad sounds fast short beeps to alert you
Chime
when a zone programmed for chime is faulted or
Tone
unsealled.
Table 4: Keypad Tones and Their Meanings
Figure 1: CM100 Graphic Keypad
Vision-64 User Guide 7
Copyright © 2002-2005 Digflex Pty Ltd