Table of Contents
Advertisement
22
Vision-64 User Guide
If the test is successful, the keypad will prompt:
Communications Test
Successful
If the test is NOT successful, the keypad will prompt:
Test Report Failed
Please call for service
Press OK or MENU
2.
Press [OK] or [MENU] to exit.
DEVICES AND OPTIONAL MODULES
Programming options in this section relate to the keypads and
other devices which may be connected to your alarm system. Your
installer will advise you on the exact makeup and configuration of
your system.
Devices > Commands >
Keypad Status
The keypad status will display the following information:
Line 1 = Keypad Number
Line 2 = Type of Keypad
Line 3 = Toggle Voltage, Temperature and Area Assignment
information.
1.
Press [MENU] + [6] + [0] + [0].
Kp001 Keypad 001
Kp002 Keypad 002
Exit
Press
2.
Use the [↑] and [↓] keys to select the keypad that you want
to view, then press [OK] to select. Alternatively, you can
enter the keypad number, then press [OK]. The location of
the keypad you are at is displayed by the ( tick).
3.
The keypad will display the status of the keypad.
Keypad 001 K001
Graphic + Prox V001
Volts = 13.87
Press OK or MENU
4.
Press [OK] or [MENU] to exit.
Devices > Commands >
RF Status
Reserved
Devices > Commands >
Serial Status
Reserved
Issue 1.03
MENU 6-0-0
OK or MENU
MENU 6-0-1
MENU 6-0-2
Devices > Commands >
X10 Status
Reserved
Devices > Commands >
LAN P/Supply
Reserved
Devices > Commands >
GSM Status
Reserved
Devices > Commands >
Ethernet Status
Reserved
Devices > Commands >
Access Status
Reserved
Devices > Commands >
X10 Status
Reserved
MENU 6-0-3
MENU 6-0-4
MENU 6-0-5
MENU 6-0-6
MENU 6-0-7
MENU 6-0-8
Copyright © 2002-2005 Digflex Pty Ltd
Hide quick links:
Advertisement
Table of Contents
