Language Settings; Channel Search - TECHWOOD 22742 Operating Instructions Manual

Language Settings

In the confi guration menu, highlight the Language
Settings item by pressing " " or " " buttons. Press
"OK" and Language Settings submenu will be
displayed on the screen:
Use " " or " " buttons to highlight the menu item
that will be adjusted and then press " " or " " button
to set.
Notes:
• System Language determines the on-screen menu
language.
• Audio Language is used for selecting the soundtrack
of a channels.
• Primary settings are the first priority when multiple
choices are available on a broadcast. Secondary
settings are the alternatives when the first options
are not available.
Install & Retune
The Install & Retune menu is mainly intended to help
you for creating a Channel Table in the most effi cient
way. Select Install & Retune from the Confi guration
menu by pressing " " or " " buttons.
This menu includes the following items:
(*) For Denmark, Sweden, Norway or Finland.
Auto Channel Scan (Retune)
Auto Channel Scan (Retune) is started by pressing
"OK" button while Auto Channel Scan (Retune) item
is highlighted.
The following message appears on the screen:
IF YOU NEED ANY ASSISTANCE OR A CUSTOMER REFERENCE NUMBER PLEASE CONTACT THE TECHWOOD HELP LINE ON 0845 543 0485
01_MB46_[GB]_(01-TV)_1900UK_IDTV_NICKEL15_22742W_10071406_50181370.indd 18 01_MB46_[GB]_(01-TV)_1900UK_IDTV_NICKEL15_22742W_10071406_50181370.indd 18
Highlight Yes or No by using " " or " " buttons and
press "OK" button to confi rm.
If Yes is selected, automatic search starts.
Selecting No cancels automatic search.
After search is completed for digital channels, a
message asking whether to search for analogue
channels appears on the screen:
Press the "OK" button to search for analogue
channels. The following menu appears on the screen
for analogue channel search:
Select your Country , Language and Text language
by using " " or " " and " " or " " buttons. Press
"OK" or RED button to continue. To cancel, press
BLUE button. The following menu will be displayed
during the automatic tuning:
After APS is fi nalized, the programme table will appear
on the screen. In the programme table you will see
the programme numbers and names assigned to the
programmes.

Channel Search

In manual channel scan, the number of the multiplex is
entered manually and only that multiplex is searched
for the channels. For each valid channel number, signal
level and signal quality are shown on the screen.
In both manual and auto search any existing channel
in the database is not re-stored to avoid redundant
duplicates of that channel.
English - 18 -
03.12.2010 16:21:55 03.12.2010 16:21:55