Language Settings - TECHWOOD 32884 HD DIGITAL Operating Instructions Manual

Menu: shows the language of the system
Preferred
These settings will be used if available. Otherwise the
current settings will be used.
• Audio: by pressing " " or " " keys change the
audio language.
• Subtitle: alter the subtitle language with " " or "
" keys. The chosen language will be seen in
subtitles.
Movie Subtitle (optional)
• In order to display subtitles properly, use this setting
to select a movie subtitle language.
• By pressing " " or " " button, select the desired
language option.
• Guide: By pressing " " or " " buttons change the
guide language.
Current
• Audio: if audio language is supported change the
audio language by pressing " " or " " buttons
• Subtitle: if subtitle is backed up, alter the subtitle
language with " " or " " buttons. The chosen
language will be seen in subtitles.
Note: If the Country option is set to Denmark, Sweden,
Norway or Finland, the Language Settings menu will function
as described below:

Language Settings

In the configuration menu, highlight the Language
Settings item by pressing " " or " " buttons. Press
English - 17 -
HELP LINE NUMBER 0845 543 0485
"OK" and Language Settings submenu will be
displayed on the screen:
Use " " or " " buttons to highlight the menu item
that will be adjusted and then press " " or " " button
to set.
Notes:
• System Language determines the on-screen menu
language.
• Audio Language is used for selecting the soundtrack
of a channels.
• Primary settings are the first priority when multiple
choices are available on a broadcast. Secondary
settings are the alternatives when the first options
are not available.
Installation
The Installation menu is mainly intended to help you
for creating a Channel Table in the most efficient way.
Select Installation from the Configuration menu by
pressing " " or " " buttons.
This menu includes the following items:
Automatic Channel Scan
Automatic channel scan is started by pressing
"OK" button while Automatic channel scan item is
highlighted.
The following message appears on the screen:
Highlight Yes or No by using " " or " " buttons and
press "OK" button to confirm.
If Yes is selected, automatic search starts.
Selecting No cancels automatic search.
After search is completed for digital channels, a
message asking whether to search for analogue
channels appears on the screen:
- 17 -