Do you have a question about the The EnviroMate BRIO and is the answer not in the manual?
Questions and answers
Marvin Mckay
April 4, 2025
Our cleaner turns on but no steam comes out the trigger, all the steam comes out the M cap instead.
1 comments:
Mr. Anderson
April 4, 2025
The Reliable EnviroMate BRIO cleaner may release steam from the M cap instead of the trigger if there is pressure buildup in the boiler and the cap is opened without following the correct procedure. The manual states that the cap should never be opened during use. Before unscrewing the boiler tank cap, you must:
1. Switch off the appliance. 2. Bleed remaining pressure using the steam button. 3. Let the appliance cool. 4. Slowly loosen the cap.
Failing to follow these steps can cause steam to escape from the cap due to residual pressure.
Need help?
Do you have a question about the The EnviroMate BRIO and is the answer not in the manual?
Questions and answers
Our cleaner turns on but no steam comes out the trigger, all the steam comes out the M cap instead.
The Reliable EnviroMate BRIO cleaner may release steam from the M cap instead of the trigger if there is pressure buildup in the boiler and the cap is opened without following the correct procedure. The manual states that the cap should never be opened during use. Before unscrewing the boiler tank cap, you must:
1. Switch off the appliance.
2. Bleed remaining pressure using the steam button.
3. Let the appliance cool.
4. Slowly loosen the cap.
Failing to follow these steps can cause steam to escape from the cap due to residual pressure.
This answer is automatically generated