Walking Belt Centering - Champion C13F Owner's Manual

WALKING BELT CENTERING

The walking belt may occasionally need to be centered. First be certain that belt is tensioned
properly. Start the treadmill and run it at about 4km/h, place the allen key through the hole in
the rear end cap and into the socket of the adjustment screw.
1. If belt has moved to the right:
Turn the right adjustment screw 1/4 turn clockwise, continue adjusting at 1/4 of a turn until
belt returns to the center.
2. If belt has moved to the left:
Turn the left adjustment screw 1/4 turn clockwise, continue adjusting at 1/4 of a turn until belt
returns to the center.
Continue to run the treadmill around 3-5 minutes to ensure the belt has been centered and
you have not made over-adjustment.
BELT ADJUSTMENT
20