Champion C13F Owner's Manual page 13

LED Indicators & Displays and Operating Ranges:
The default values are PROGRAM = Manual (M), TIME = 00:00 (counting up), SPEED = ,
DISTANCE = 0.00 (counting up), CALORIES = 0 (counting up), PULSE = 0, and INCLINE = L1.
A. 2 LED Indicators: The PULSE Indicator is on and the PULSE/INCLINE Display shows pulse rate.
The INCLINE Indicator is on and the PULSE/INCLINE Display shows incline level.
B. PROGRAM Display: Shows the information in action and chosen by pressing "PROGRAM" Key.
P1 to P5 and 1 user-setting modes can be chosen from.
C. TIME Display: Shows the exercising time with counting up or down. While the treadmill is not
running and the SAFETY KEY is on, it can be chosen by pressing "ENTER" then adjusted by pressing
"+" or "-". The range of counting up is from 00:00 to 99:59 and 10:00 to 99:00 with counting down.
While counting down to 00:00, the monitor will beep 12 times then the treadmill will stop.
D. SPEED Display: Shows the speed that the treadmill is providing. It can be adjusted by pressing
"SPEED+" and "SPEED- " keys from 0.5 to 10MPH.
E. DISTANCE Display: Shows the distance with counting up. The range of counting up is from
0.00 to 999MPH/KPH
F. CALORIES Display: Shows the calories with counting up. The range of counting up is from 0 to 999 Kcal.
G. PULSE/INCLINE Display: The default value shown is the pulse rate and the PULSE Indicator is on.
It switches to the value of incline level while adjusting and the INCLINE Indicator is on.
Three seconds after the adjusting, it switches back to show the pulse rate.
Operation Instructions (Please Read Carefully before Using):
A. Safety Tips:
To start, turn on the power and attach the Safety Key to the monitor. Notice that the machine does
not work and off the LED display without the Safety Key attached. Please clip the other end of the
Safety Key to the user before exercising to ensure the machine will stop in case the user accidentally
runs off the treadmill. Should that happen, the Safety Key will be off the monitor and the treadmill
will stop at once to avoid further injury.
935 COMPUTER OPERATION
12