Using The Bluetooth@ Devices; Registering A Bluetooth Device - JVC KD-APD89 Instructions Manual

If a USB device has been attached...
SOU ACE
Playback starts from where it has
a :)
b'ffi ".pp'd
' " ' 0 0' ' '
. . • If adifferent USB device is
currently attached, playback starts
from the beginning.
To stop play and detach the USB device
Straightly pull it out from the unit.
o
Press SOURCE to listen to another playback source.
You can operate the USB device in the same way you
operate the files on adisc. (See pages 10 and 11.)
• You can listen to WAY files by following the MP31
WMA files operations listed on pages 10 and 11.
Cautions:
• Avoid using the USB device if it might hinder your
safety driving.
• Do not pull out and attach the USB device repeatedly
while "Reading" is shown on the display.
o
Do not start the car engine if aUSB device is
connected.
o
This unit may not be able to play the files depending
on the type of USB device.
o
Operation and power supply may not work as
intended for some USB devices.
o
You cannot connect acomputer to the USB input
terminal of the unit.
o
Make sure all important data has been backed up to
avoid losing the data.
• Do not leave aUSB device in the car, expose to direct
sunlight, or high temperature to avoid deformation
or cause damages to the device.
o
Some USB devices may not work immediately after
you turn on the power.
o
For more details about USB operations, see pages 3S
and 36.
Using the Bluetooth@ devices
For Bluetooth operations, it is required to connect the
Bluetooth Adapter (KS-BTA200) to the CD changer
jack on the rear of this unit.
o
Refer also to the instructions supplied with the
Bluetooth adapter and the Bluetooth device.
• Refer to the list (included in the box) to check
the countries where you may use the Bluetooth@
function.
To use aBluetooth device through the unit
("BT-PHONE" and "BT-AUDIO") for the first time,
you need to establish Bluetooth wireless connection
between the unit and the device.
o
Once the connection is established, it is registered in
the unit even if you reset your unit. Up to five devices
can be registered in total.
o
Only one device can be connected at atime for each
source ("BT-PHONE" and "BT-AUDIO").
Registering a Bluetooth device
Registration (Pairing) methods
Use either of the following items in the Bluetooth menu
to register and establish the connection with adevice.
o
Select "BT-PHONE" or "BT-AUDIO" as the source to
operate the Bluetooth menu.
Open Make the unit ready to establish anew
Bluetooth connection.
Connection is established by operating the
Bluetooth device.
Search Make the unit ready to establish anew
Bluetooth connection.
Connection is established by operating
the unit.
o
When _ is shown on the display, you can
move back to the previous screen by pressing number
bunon 3.
_ 12
OPERATIONS & EXTERNAL DEVICES