Registering Magic Remote Control; How To Use Magic Remote Control; Precautions To Take When Using The Magic Remote Control - LG LA62 Series Owner's Manual

34
MAGIC REMOTE CONTROL FUNCTIONS

registering Magic remote Control

It is necessary to 'pair' (register) the magic
remote control to your TV before it will work.
How to register the Magic remote Control
BACK HOME
1 To register automatically,
turn the TV on and press the
Wheel(OK) button. When
registration is completed, the
completion message appears on
the screen.
P
2 If registration fails, turn the TV
off and back on, then press the
Wheel(OK) button to complete
registration.
MY APPS
How to re-register the Magic remote Control
1 Press and hold the
BACK
and SMArT
for 5 seconds to reset, then
register it by following "How
SMArT
to register the Magic Remote
Control" above.
2 To re-register the Magic
Remote Control, press and
hold the BACK button for 5
seconds toward the TV. When
registration is completed, the
completion message appears
on the screen.

How to use Magic remote Control

1 If the pointer disappears,
move the Magic Remote
Control slightly to left
or right. Then, it will
automatically appear on the
screen.
» If the pointer has not been
used for a certain period
of time, it will disappear.
2 You can move the pointer by
aiming the Pointer Receiver
of the Magic Remote Control
at your TV then move it left,
right, up or down.
» If the pointer does not
work properly, leave the
Magic Remote Control for
10 seconds then use it
again.
1
2
BACK
buttons together
Precautions to Take when using
the Magic remote Control
y Use the Magic Remote Control within
y A communication failure may occur due
y The Magic Remote Control may be
y Take care not to bump into nearby
y Manufacturer and installer cannot provide
y It is recommended that an Access Point
More
If you press Wheel(OK) on the Magic
Remote Control, the following screen
appears. Shows information about the
current programme and screen.
You can select More Menu.
the maximum communication distance
(10 m). Using the Magic Remote
Control beyond this distance, or with
an object obstructing it, may cause a
communication failure.
to nearby devices. Electrical devices such
as a microwave oven or wireless LAN
product may cause interference, as these
use the same bandwidth (2.4 GHz) as the
Magic Remote Control.
damaged or may malfunction if it is
dropped or receives a heavy impact.
furniture or other people when using the
Magic Remote Control.
service related to human safety as the
applicable wireless device has possibility
of electric wave interference.
(AP) be located more than 1 m away from
the TV. If the AP is installed closer than
1 m, the Magic Remote Control may not
perform as expected due to frequency
interference.