LG LA62 Series Owner's Manual page 19

LN570B, LN570Y, LN570Z, LN5700, LN572*
1
Stand Base
2
3
y When attaching the stand to the TV
P5 x 25
3EA
y Make sure that the screws are fastened
Stand Body
Front
y Remove the stand before installing the
y Removing the protective film (from the
M4 x 14
4EA
ASSEMBLING AND PREPARING
CAuTION
set, place the screen facing down on a
cushioned table or flat surface to protect
the screen from scratches.
completely. (If they are not fastened
securely enough, the TV may tilt forward
after being installed.)
Do not fasten the screws with excessive
force otherwise they may be worn out
and become loose.
NOTE
TV on a wall mount by performing the
stand attachment in reverse.
bottom) (Depending on model)
» Protective film is temporarily attached
to prevent the surface of the product
from being damaged during delivery.
» Once the TV has been installed,
please remove the protective film on
the bottom of the unit as shown in the
figure.
19