Advertisement
PC-XC350
Disaeesmbly method
Removing the rear panel
1. From behind the body, remove the eight screws A
retaining the rear panel.
2. Then remove the two screws B retaining the rear panel.
3. Take out the rear panel from the body.
Note:
Be careful of the FM antenna white wire, it is connection with the tuner PCB up side.
You can directly take out from the tuner PCB.
When you re-assembly the product, plug the FM antenna white wire into the Tuner PCB's
"FM ANT" position.
1 - 4
Screw B.
Screw A.
Screw A.
Advertisement
