Ford 2006 Explorer Owner's Manual page 256

Roadside Emergencies
carownersmanual.net
carownersmanual.net
Location of the spare tire and tools
Have a flat tire serviced by an authorized dealer in order to prevent
damage to the TPMS sensor, refer to Changing tires with TPMS in the
Tires, Wheels and Loading chapter. Replace the spare tire with a road
tire as soon as possible.
The spare tire and tools for your vehicle are stowed in the following
locations:
Jack, lug nut wrench, jack handle,
Removing the jack and tools
1. Open liftgate and remove the
carpeted floor lid.
2. Turn the jack screw eyelet (1)
counterclockwise to release
pressure.
3. Rotate the locking pin (2)
clockwise until loose then pull out
until it stops and remove the jack
and tool bag from the bracket.
4. Remove the chock and jack tools
from the provided bag and rotate
the wrench socket out from the
handle.
256
2006 Explorer (exp)
Owners Guide (post-2002-fmt)
USA (fus)
Tool
Spare tire Under the vehicle, just in front of
the rear bumper. The spare tire
winch drive nut is located at the
rear center of the cargo area
under a lid.
Behind the rear seat under the
wheel chock carpeted floor lid in the cargo
floor. The tools are located in a
bag attached to the jack.
Location