IBM G41/G50 User Manual page 12

How to change display modes
Your operating system manual defines the procedure
you should follow to change the default display
mode.
After selecting the optimum mode you need not perform
this operation again unless you change your computer or
software configuration.
Notes:
1. The computer automatically changes display modes to
accommodate some applications. Generally, you will
not notice this.
2. The image size, position and shape may change when
the display mode changes. This is normal and the
image can be readjusted using the monitor controls
(see Adjusting the image on page 10).
Addressability Refresh
720 x 400 70 Hz NI
640 x 480 60 Hz NI
640 x 480 72 Hz NI
640 x 480 75 Hz NI
640 x 480 85 Hz NI
800 x 600 72 Hz NI
800 x 600 75 Hz NI
800 x 600 85 Hz NI
1024 x 768 43 Hz I
1024 x 768 70 Hz NI
1024 x 768 72 Hz NI
Table 1. Factory Set Display Modes.
Legend : I = Interlaced
NI = Non-Interlaced
Line Rate Notes
31.5 kHz DOS Prompt
31.5 kHZ VESA
35.5 kHZ VESA
37.5 kHZ VESA
43.3 kHZ VESA
48.1 kHZ VESA
46.9 kHZ VESA
53.7 kHZ VESA
35.5 kHZ Interlaced
56.5 kHZ VESA
58.1 kHZ
9