User Controls - IBM C220p User Manual

User controls

The image is already optimized for many display modes. However, the controls can be used
to adjust the image to your liking.
OSD key function
Icon Control
Power switch
OSD/OK
Move right;
Brightness adjustment
selection
Move left;
Contrast adjustment
selection
Hotkey;
Exit
Hotkey functions
Brightness and contrast can be adjusted as follows, without the need to display the OSD:
Select the function and use the buttons to adjust. If adjustment is not made within 15 seconds,
the current settings will be saved and the control screen will disappear automatically.
Icon Control
Brightness
Contrast
Signal input selection
Description
Switches the monitor on and off.
Activates the On-Screen-Display/Select control
icon/Save Adjustment
Moves the highlight to the icon to the right, or on
adjustment screens it increases the effect of the
adjustment.
Moves the highlight to the icon to the left, or on
adjustment screens it decreases the effect of the
adjustment.
Hotkey for signal input selection, or exit OSD control.
Description
Adjusts the background brightness
Adjusts the contrast between foreground and background
Select the video signal input, D-Sub or DVI-A.
11