Video Recording - Edimax IC-1510 User Manual

Stop
Pause
Forward
Snapshot
Record
7.5.

Video Recording

This utility allows you record the video in AVI files. There are two ways of video recording –
Manual Recording and Schedule Recording.
normal display mode and the Internet Camera is disconnected,
clicking on the "Play" can make the viewer connect to the Internet
Camera. In the playback mode, clicking on the "Play" can play the
video in the normal speed.
The "Stop" button is an intelligent play user-interface. In the
normal display mode and the Internet Camera is connected,
clicking on the "Stop" can make the viewer disconnect the
camera. In the playback mode, clicking on the "Stop" can stop
playing the video.
The "Pause" button provides you a way to pause the current
video display. When the displaying video is paused, click on the
"Play" again to resume the video display.
The "Forward" button to forward the speed of display when
playback the recording file. Click the button at a time will increase
the playing speed one time.
Click "Snapshot" will make the viewer to take a snapshot of the
video and save the picture as a bitmap file in the hard disk. (You
can set the directory for storing these bitmap files at the Section
7.8.4)
By clicking "Record" you can record video immediately. (You can
set the directory for storing video files at the section 7.8.4)
34