Battery Replacement - Axis P3346-VE Installation Manual

Network camera
Hide thumbs Also See for P3346-VE:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

Battery Replacement

This Axis product uses a 3.0 V CR2032 lithium battery as the power supply for its internal real-time
clock (RTC). Under normal conditions this battery will last for a minimum of 5 years. Low battery
power affects the operation of the RTC, causing it to reset at every power-up. A log message will
appear when the battery needs replacing. The battery should not be replaced unless required!
If the battery does need replacing, please contact www.axis.com/techsup for assistance.
Dispose of used batteries according to the manufacturer's instructions.
Risk of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent battery, as recommended by the manufacturer.
Dome Cover Cleaning
Be careful not to scratch or damage the dome cover. Do not clean a dome cover that looks
clean to the eye and never polish the surface. Excessive cleaning could damage the surface.
For general cleaning of a dome cover it is recommended to use a non-abrasive, solvent-free
neutral soap or detergent with water and a soft cloth. Rinse well with clean lukewarm
water. Dry with a soft cloth to prevent water spotting.
Never use harsh detergents, gasoline, benzene or acetone etc. and avoid cleaning in direct
sunlight or at elevated temperatures.

Advertisement

Table of Contents
loading

This manual is also suitable for:

P3367-veP3384-ve

Table of Contents