Integrated Peripherals; Onchip Ide First/Second Channel; Ide Prefetch Mode; Ide Hdd Block Mode - IBM CI5VGM Series User Manual

Chapter 3 BIOS Configuration

Integrated Peripherals

This option sets your hard disk configuration, mode and port.
INTEGRATED PERIPHERALSP
OnChip IDE First Channel : Enabled
OnChip IDE Second Channel : Enabled

IDE HDD Block Mode

: Disabled

IDE Prefetch Mode

: Enabled
IDE HDD Block Mode : Auto
IDE Primary Master PIO : Auto
IDE Primary Slave PIO : Auto
IDE Secondary Master PIO : Auto
IDE Secondary Slave PIO : Auto
IDE Primary Master UDMA : Auto
IDE Primary Slave UDMA : Auto
IDE Secondary Master UDMA : Auto
IDE Secondary Slave UDMA : Auto
Init AGP Display First : AGP
Onboard Audio Chip : Enabled

OnChip IDE First/Second Channel

The integrated peripheral controller contains an IDE interface with
support for two IDE channels. Select Enabled to activate each channel
separately.
IDE Prefetch Mode
This field allows your hard disk to prefetch the next read and initiate the
next process.
IDE HDD Block Mode
This field allows your hard disk controller to use the fast block mode to
transfer data to and from your hard disk drive.

IDE Primary/Secondary Master/Slave PIO

These fields allow your system hard disk controller to work faster. Rather
than have the BIOS issue a series of commands that transfer to or from
the disk drive, PIO (Programmed Input/Output) allows the BIOS to
communicate with the controller and CPU directly.
The system supports five modes, numbered from 0 (default) to 4, which
primarily differ in timing. When Auto is selected, the BIOS will select the
best available mode.
60
ROM PCI/ISA BIOS
AWARD SOFTWARE INC.
Onboard FDD Controller
Onboard Serial Port 1
Onboard Serial Port 2
UART 2 Mode
Onboard Parallel Port
Parallel Port Mode
ESC : Quit
F1 : Help
F5 : Old Values
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
CI5VGM User's Manual
: Enabled
: 3F8/IRQ4
:
:
: 378/IRQ7
: SPP
: Select Item
PU/PD/+/- : Modify
(Shift) F2 : Color