Creating A New Configuration Server Profile - Nokia 7710 User Manual

ReMX_UG.book Page 140 Tuesday, March 1, 2005 11:15 AM
Remote configuration takes place over a GSM data call or
GPRS connection.
The Remote configuration application uses SyncML Device
Management version 1.1.1 technology. For information on
Remote Configuration compatibility, please contact the
supplier of configuration solution you want to manage
your smartphone settings with.
To start a configuration session, open the Device
manager application. Select a profile from the list, press
and select Configuration
To view configuration log, tap
configuration session has ended. The log file shows the
configuration status of the selected profile.
To disable configuration, press
Configuration > Disable all. You cannot receive
configuration settings from any of the configuration
servers for which you have a profile. Clear this
command to allow the reception of configuration
settings from those servers for which you have a profile
and have allowed configuration.
Creating a new configuration server
profile
Configuration server profile is the settings for the remote
server. You can create several profiles if you need to access
multiple servers.
140
You may receive the configuration server profile settings
as a special message from your service provider.
1
Open the Device manager application and press
Select
copy the values from an existing profile to be used as
the basis for the new profile.
2 The Profile Wizard opens. Define the following:
Server name:
server.
Server ID:
> Start.
configuration server. Contact your service provider or
Log when the system administrator for the correct value.
Password:
the server. Confirm the password.
Access point:
and select
for the data connection to the server.
Host address:
Contact your service provider or system administrator
for the correct value.
Port: - Write the port number of the server. Contact
your service provider or system administrator for the
correct value.
User name:
Password:
then confirm it.
Allow configuration:
initiate a configuration session.
Auto-accept sync requests:
want the server to ask for your confirmation when it
initiates a configuration session.
Profile > New.... Choose whether you want to
- Write a name for the configuration
- Write the unique ID to identify the
- Write a password to identify your device to
- Select the access point you want to use
- Write the URL address of the server.
- Write your user name for the server.
- Write your password for the server and
- Select this to allow the server to
- Select this if you do not
.