Voice Dialling; Telephone Settings; Call Diverting (Network Service) - Nokia 7710 User Manual

ReMX_UG.book Page 39 Tuesday, March 1, 2005 11:15 AM

Voice dialling

You can make a phone call by saying a voice tag that has
been added to a contact card. Any spoken word(s) can be
a voice tag.
Before using voice tags, note that:
• Voice tags are not language-dependent. They are
dependent on the speaker's voice.
• You must say the name exactly as you said it when you
recorded it.
• When recording and saying the voice tags, speak up. If
you speak too softly, the system may not recognise the
voice tag properly.
• Voice tags are sensitive to background noise. Record
voice tags and use them in a quiet environment.
• Very short names are not accepted. Use long names and
avoid similar names for different numbers.
Note: Using voice tags may be difficult in a noisy
environment or during an emergency, so you should not
rely solely upon voice dialling in all circumstances.
To add voice tags, see "Voice tags" on page 63.
To use voice dialling, press and hold
headset button until you hear a start tone or see a note
on the display. Say the voice tag for the number you
want to dial. To try again if the voice tag was not
recognised, press and hold down the
seconds. To return to normal dialling, briefly press the
key or headset button, and press the ESC key.

Telephone settings

Call diverting (network service)

Call diverting allows you to direct your incoming voice
calls to another phone number. This is also known as call
forwarding.
1 Press , and select
A dialog opens.
2
Go to the Voice calls
3 Define the following:
Divert all calls: - When activated, all incoming calls are
diverted.
Divert if busy: - When activated, incoming calls are
diverted when you are engaged in another call.
Divert if not answered:
are diverted if you do not answer them within a
certain time period.
Divert if out of reach:
are diverted when the device is switched off or outside
the network service area.
Divert if not available:
or the turns on Divert if busy:,
not answered:.
The options available are:
Activate - Opens a dialog where you type the number
key a few to which you want to divert the calls and - if available
- choose the time period after which the call is
diverted, if it is not answered. Tap
Tools > Settings > Call divert....
page.
- When activated, incoming calls
- When activated, incoming calls
- In a single action, this option
Divert if out of reach:, and Divert if
to select
39