Adjusting Program Settings - Arlec PEH002 User Manual

ADJUSTING PROGRAM SETTINGS

FUNCTION
ADJUST THE COMFORT &
ECONOMY TEMPERATURES
ALTERING THE USER PROGRAM
FOR THE WEEK
ADJUSTING FOR DAYLIGHT
SAVINGS
LOCK THE CONTROL PANEL
PEH002 Instructions.indd 10
STEPS (Refer to Fig.3)
Press the TEMPERATURE button
"4"
Use the UP and DOWN buttons
to set the required Comfort
temperature.
Press the TEMPERATURE °C
button "4".
Use the UP and DOWN buttons
to set the required Economy
temperature. Press the
TEMPERATURE button "4" again
to confirm the temperature
setting.
Press the program p selection
button "5".
Use the UP and DOWN buttons
to select the "UP" program.
Press the program p selection
button "5"
Press the program PROG button
"6" to open the program.
Make the required alterations
to Economy and Comfort
periods as described in "SETTING
THE USER PROGRAM FOR THE
WEEK".
Press the TIMER button twice.
Summer: Press the UP button
"11" to advance 1 hour.
Winter: Press the DOWN button
"10" to set the timer clock back
1 hour.
Press the TIMER button "9" twice
to terminate operation.
Electronic Locking: Press the
Program Selection P Button "5"
Press the program "PROG"
button "6" and TIMER button
"8" simultaneously.
Repeat the above step to
unlock the controls.
Mechanical locking/unlocking:
Screw/unscrew the tamper
screw located on the cover of
the control panel.
10
DIGITAL DISPLAY (Refer to Fig.4)
The temperature and comfort
symbol will flash.
The default Comfort
temperature is 22°C. The
Comfort temperature cannot
be set less than 5°C above the
Economy temperature.
The temperature and Economy
symbol will flash.
The factory default Economy
temperature is 17°C.
The Economy temperature
cannot be set less than
5°C below the Comfort
temperature. To turn off the
Economy Period heating set
to 5°C.
The program "UP" will flash
The program "UP" will stop
flashing.
It is necessary to alter a
complete 24-hour profile for
changes to take effect.
The "hour" will flash.
The current program will be
displayed on the control panel.
The program type will flash.
The lock symbol (a padlock) is
displayed and buttons will not
operate.
The lock symbol (a padlock)
will disappear and buttons will
operate again.
22/12/09 2:30:12 PM