Problems Relating To Images - Epson EMP-S4 User Manual

Problems Solving

Problems relating to images

No images appear
Check
Was the [Power] button pressed?
Are the indicators switched off?
Is A/V Mute mode active?
Have the configuration menu settings
been made correctly?
Is the projected image completely black?
Only when projecting computer images
Are the image signal format settings
correct?
Only when projecting images
from a video source
Is the A/V mute slide still closed?
Projection stops automatically
Check
Is "Sleep Mode" set to "On"?
Press the [Power] button to turn the power on.
The power cable is not connected correctly or power is not being supplied normally. Connect the
projector's power cable correctly. sQuick Start Guide
Check that your power supply socket is working.
Press the [A/V Mute] button on the remote control to cancel the mute.
Reset all of the settings. "Reset" - "Reset All"
Some input images, such as screen savers, may be completely black.
If a composite videog or S-Videog
command to select the signal format. "Signal" - "Video Signal"
Open the A/V mute slide.
If you do not want sleep mode to be used, change the "Sleep Mode" setting to "Off". "Extended" -
"Operation" - "Sleep Mode"
sp.37
Remedy
sp.39
source is connected to the projector, use the "Video Signal" menu
sp.34
Remedy
47
sp.20