Table of Contents
Advertisement
Caring for the CD-RW / DVD-ROM Combination Drive
To protect your CD-RW/DVD-ROM Combination Drive during operation,
observe the following precautions:
v Do not move the drive when it is in use. Doing so might cause data error or
might damage the drive or discs.
v Avoid exposing the drive to the following conditions:
– High humidity
– High temperature
– Excessive dust
– Mechanical vibration
– Sudden shock or dropping
– Placement on an inclined surface
– Direct sunlight
– Sudden temperature changes
v Do not insert foreign objects into the drive.
v Do not stack objects on the drive.
v Do not remove the drive cover or attempt to service the drive.
v Remove any discs from the disc drawer and make sure that the drawer is
closed before moving the drive unit.
v Keep the original packing materials. If you need to ship the drive unit to a
different location, use the original packing materials to ensure that the drive
is transported safely.
Manually ejecting a disc
In case of a power failure, and the drive will not allow the disc to eject, turn
off the computer, and straighten a large paper clip to form a tool. The
straightened end must extend at least 45 mm (1.8 in.). Insert the extended end
into the emergency eject hole on the front of the drive (see "Front view of the
drive" on page 1-3). Push the paper clip until the tray opens. Gently pull out
the tray until you can remove the disc.
45 mm
1.8 in
1-14
IBM 48X/24X/48X/16X Max CD-RW/DVD-ROM Combination Drive: User's Guide
Advertisement
Table of Contents
