Interface - Stromer ST1 User Manual

interFace – OPERATION
1. sWitch on stroMer
Important note: When switching on, the pedal must be completely free of load.
2 sec.
2. sWitch oFF stroMer
2 sec.
3. select suPPort or recuPeration MoDe
back continue
2 sec.
mANuAL RECuPERATION mOdE
The energy recovery is normally activated upon braking.
It can also be activated manually by selecting the mode.
Select a «Recup-mode» to recover energy and thereby
brake electrically.
SuPPORT mOdE
The Stromer has four different modes:
1 – Eco (150 %), 2 – City (200 %), 3 – Tour (250 %)
and 4 – Power (300 %)
When idling (Zero mode), nothing is shown in the mode
display and the motor does not provide any support.
ready
off
23