Table of Contents
Advertisement
•
: allows the system to skip certain tests while
Quick Boot
booting.
•
: controls the display of BenQ logo during system
Quite Boot
boot. When enabled, BenQ logo will be displayed during
system boot. When disabled, diagnostic texts will be displayed
during system boot.
Exit menu
The
menu displays ways of exiting BIOS setup. After
Exit
finished with your settings, you must save and exit so that the
new settings can take effect.
•
: saves the changes you have made and
Exit Saving Changes
exits BIOS setup. After finishing with your settings, you must
save and exit so that the new settings can take effect.
•
Exit Discarding Changes
the changes you have made.
•
loads the default values for all the
Load Optimal Defaults:
items in the BIOS setup utility.
•
: loads the settings you saved
Load Custom Defaults
previously.
•
: saves your settings.
Save Custom Defaults
•
: cancels all changes since last save, without
Discard Changes
exiting the BIOS setup utility.
It is recommended that you go into BIOS to load manufacture
defaults, whenever you have installed new hardware
components.
: exits BIOS setup without saving
Using BIOS setup
35
Advertisement
Table of Contents
