M-Life ML0529 Owner's Manual page 9

Using code
The mobile phone and the SIM cards support sorts of passwords, in order
to prevent the phone and the SIM cards from being misused. When you are
prompted to input any of the codes mentioned below, just input the correct
code and then press the OK key. If you input a wrong code, press the Right
soft key to clear it and then input the correct code. To modify the PIN, PIN2,
and/or phone lock code, choose Settings > Security setup > Change pas-
sword.
Phone lock code
The phone lock code may be set to prevent your mobile phone from being mi-
sused. In general, this code is provided along with the mobile phone by the
manufacturer. The initial phone lock code is set to 0000 by the manufacturer. If
EN
the phone lock code is set, you need to input the phone lock code when powe-
ring on the mobile phone.
PIN
The PIN (Personal identification number, 4 to 8 digits) code prevents your SIM
card from being used by unauthorized people. In general, the PIN is supplied
with SIM card by the network operator. If PIN check is enabled, you need to in-
put the PIN each time when you power on your mobile phone. The SIM card
will be locked if you input wrong PIN code for three times.
Unlocking methods as follows:
-Input the correct PUK according to the screen tips to unlock the SIM card.
-Then input the new PIN and press the OK key.
-Input the new PIN again and then press the OK key.
-If the input PUK is correct, the SIM card will be unlocked and the PIN will be
reset.
9