Installing T-Flash Card - M-Life ML0529 Owner's Manual

Note: The SIM card will be locked if you input wrong PIN code for three times.
To unlock the SIM card, you need to input the PUK. In general, the PUK can
be obtained from the network operator.
PUK
The PUK code (Personal Unlocking Key, 8digits) is required to change a bloc-
ked PIN. It is supplied with SIM card. If not, contact your network operator. If
you input wrong PUK code for 10 times, SIM card will be invalid. Please con-
tact the network operator to replace the SIM card.
Barring code
A barring code is required for setting the call barring function. You can obtain
this code from the network operator to set the call barring function.
EN

3.2 Installing T-Flash card

The T-Flash card is a pluggable mobile storage card inside the mobile phone.
To install the T-Flash card, open its latch, place its indented side downward, in-
sert the card into the card slot, and then close the latch.
To remove the T-flash card, open its latch and slightly press the card inward.
The card will automatically pop out. Close the latch.
Note:
1. The mobile phone cannot automatically identify the T-flash card being inser-
ted when the mobile phone is powered on. You must power off the mobile pho-
ne and then power it on, so that the phone can identify the T-Flash card.
2. The T-Flash card is a miniature object. Keep it out of the reach of children
for fear that children swallow it!
10