M-Life ML0529 Owner's Manual page 21

• Network selection: Set Network selection mode to Automatic or Manual.
Automatic is recommended. When Network selection mode is set to Automa-
tic, the mobile phone will prefer the network where the SIM card is registered.
When Network selection mode is set to Manual, you need to select the ne-
twork operator's network where the SIM card is registered.
• Call divert
this network function enables you to forward incoming calls to another number
you have previously specified.
• Call barring
Call barring function enables you to bar calls as needed. When setting this
function, you need to use a network barring code, which can be obtained from
EN
the network operator. If the code is wrong, an error message will be prompted
on the screen. After selecting a call barring option, continue to select Activate
or Deactivate. The mobile phone will prompt you to input the call barring code
and then contact the network. A moment later, the network will make a respon-
se and send the operation results to the mobile phone.
• Call waiting
Activate: After you choose Activate, the mobile phone will contact the network.
A moment later, the network will make a response and send a message to ack-
nowledge your operation. If the call waiting function is activated, the network
will alert you and the mobile phone screen will display the incoming call num-
ber if others are calling you while you are already in a conversation.
• Hide ID: When you call someone, he or she can't find out your number if you
enable this function.
21