Download Print this page

TDK indiDVD Hardware Manual page 6

Recordable dvd/cd external drive
Hide thumbs Also See for indiDVD:

Advertisement

5. Open the disc tray by pressing the front-panel EJECT button.
6. Load the TDK Disc Blender Software Suite Disc 1 into Indi DVD.
The software installer screen should appear. If it doesn't, double click on My Computer, double
click on Indi DVD, then double click SETUP.EXE.
7. Install the TDK Disc Blender Software Suite by clicking the desired programs.
Follow the on-screen prompts to finish installation.
If your computer is a Mac:
1. Connect the IEEE 1394/FIREWIRE cable to an IEEE 1394/FIREWIRE port on your computer and to
Indi DVD's rear-panel IEEE 1394/FIREWIRE port.
2. Connect the power cord to Indi DVD's DC IN.
3. Connect the plug to a live power outlet.
4. Using Indi DVD's rear-panel switch, power the drive ON.
4
Indi DVD ReWRITER : Hardware Guide
5. Open the disc tray by pressing the front-panel EJECT button.
6. Load the TDK Disc Blender Software Suite Disc 2 into Indi DVD.
7. Install the Roxio Toast Lite, if desired.
USING INDI DVD'S REAR PANEL AUDIO OUTPUTS
Indi DVD has a stereo (L/R) analog audio output, located on the drive's rear panel. Using an RCA type
audio cable, Indi DVD can be connected directly to a mini-system or stereo receiver for audio
playback. By default, Indi DVD will play audio digitally through the included Digital MixMaster (PC)
software. If you wish to play audio digitally through Digital MixMaster, no adjustments are required.
To enable Digital MixMaster playback through Indi DVD's rear panel (analog) audio outputs
(Windows only):
1. Using an RCA type audio cable, connect Indi DVD's rear panel audio outputs (L/R) to the inputs on
an amplification device such as a stereo receiver or mini-system.
2. In the Windows Device Manager, right click on TDK DVDRW0404N and select PROPERTIES.
3. Select the PROPERTIES tab and un-check ENABLE DIGITAL CD AUDIO FOR THIS CDROM DEVICE.
4. Start Digital MixMaster and click the TOOLS button.
5. Select INPUT DEVICES\CDA FILES and click the CONFIGURE button.
6. Check USE ANALOG PLAYBACK FOR CDA FILES.
7. Close Digital MixMaster and restart the system.
When using Digital MixMaster, audio playback will now occur through Indi DVD's rear panel audio
outputs.
NOTE: If your audio playback application is not
Digital MixMaster, check your audio playback
application's documentation for information on how
to enable analog audio playback.
5
SECTION 1 : Drive Installation

Advertisement

loading