Advertisement
2. Connect the power cord to Indi DVD's DC IN.
3. Connect the plug to a live power outlet.
4. Using Indi DVD's rear-panel switch, power the drive ON.
5. Open the disc tray by pressing the front-panel EJECT button.
NOTE: Refer to the Software Quick Guide
for instructions on using the software.
6. Load the TDK Disc Blender Software Suite Disc 1 into Indi DVD.
The software installer screen should appear. If it doesn't, double click on My Computer, double
•
click on Indi DVD, then double click SETUP.EXE.
7. Install the TDK Disc Blender Software Suite by clicking the desired programs.
Follow the on-screen prompts to finish installation.
•
If your computer is a PC running Windows 98SE or ME:
1. Load the TDK Disc Blender Software Suite Disc 2 into your computer's original disc drive.
2. Connect the USB cable to a USB 2.0 port on your computer and to Indi DVD's rear-panel
USB 2.0 port.
NOTE: Connecting Indi DVD to a USB 1.1 port will
result in slow performance and may cause disc
recording errors. Connect Indi DVD to a USB 2.0
or IEEE 1394/FireWire port for best performance.
3. Connect the power cord to Indi DVD's DC IN.
4. Connect the plug to a live power outlet.
5. Using Indi DVD's rear-panel switch, power the drive ON.
A "New Hardware" window should appear.
•
6. Click NEXT.
7. Check the "Search for the best driver for your device (recommended)" option and click NEXT.
2
Indi DVD ReWRITER : Hardware Guide
8. Make sure that only "Specify Location" is checked and click BROWSE.
An explorer window will appear.
•
9. Double click the drive where Disc Blender Software Suite Disc 2 is loaded.
10. Double click BONUS UTILITIES, then click HI-SPEED USB DRIVER.
11. Click OK and follow the on-screen prompts to finish installation.
12. Load Disc Blender Software Suite Disc 1 into your computer's original disc drive and reboot your
computer.
The software installer screen should appear. If it doesn't, double click on My Computer, double
•
click on the drive into which you loaded Disc Blender Software Suite Disc 1, then double click
SETUP.EXE.
13. Install the TDK Disc Blender Software Suite by clicking the desired programs.
Follow the on- screen prompts to finish installation.
•
IEEE 1394/FIREWIRE INSTALLATION INSTRUCTIONS
If your computer is a PC running Windows 98SE, 98ME, 2000 or XP:
1. Connect the IEEE 1394/FIREWIRE cable to an IEEE 1394/FIREWIRE port on your computer and to
Indi DVD's rear-panel IEEE 1394/FIREWIRE port.
2. Connect the power cord to Indi DVD's DC IN.
3. Connect the plug to a live power outlet.
4. Using Indi DVD's rear-panel switch, power the drive ON.
NOTE: If your computer is a Mac, connect Indi DVD to
the computer's IEEE 1394/FireWire port for best
results.
3
SECTION 1 : Drive Installation
Advertisement
